Xerox 255 DC - Manual (Page 56)

Page 44 Xerox Document Centre User Guide
Making Transparencies with Dividers
Typical Application
Produce transparency sets with divider inserts.
Procedure
1. Ensure that transparencies and divider separator stock
are loaded into different paper trays.
2. Load the originals into the Document Feeder.
3. Depending on the configuration of your machine
press either the More Copy Features Tab or the
Output Format Tab. If More Copy Features Tab is
selected press Output Format Tab.
4. Press the Transparencies button.
5. On the Transparency Dividers screen, select either
Blank or Imaged Dividers. Selecting Imaged Dividers
will produce dividers with the same image as on the
transparency.
6. Press the Transparency Stock button to change the
current tray selection. Press the Divider Stock button
to change the current divider stock selection.
7. Press the Start ( ) button.
Originals
Transparencies
with Dividers
Ensure both tray selections are correct.
Press a button to change the selection.