Xerox 255 DC - Manual (Page 55)

Xerox Document Centre User Guide Page 43
T
ry Thes
e Jobs
Placing Multiple Images on a Single Page
Typical Application
Any situation where you want to present multiple
reduced images (thumbnail images) to a reader.
Procedure
1. Load your Originals.
2. Depending on the configuration of your machine
press either the More Copy Features Tab or the
Output Format Tab. If the More Copy Features Tab
is selected press Output Format Tab.
3. Press the Multi-Up button then press On.
4. Select the correct orientation of your originals based
on the information displayed on the screen.
5. Select the number of rows and columns. Press the
Save button.
6. Ensure the originals are loaded into the Document
Feeder as illustrated on the Multi-Up screen.
7. Make your programming selections by touching the
screen. The most common selections are on the Basic
Copying Tab (Output, 2-sided Copy, Reduction/
Enlargement, and Paper Supply).
8. Use the keypad to enter the number of copy sets.
9. Press the Start ( ) button.
HINT Sixteen 8.5 x 11 inch images can be displayed on 8.5 by
11-inch paper (4 rows x 4 columns).