Xerox 255 DC - Manual (Page 14)

Page 2 Xerox Document Centre User Guide
Symbology
This symbol on the machine indicates heated surface
Electrical Safety
CAUTION Ensure that the power connection for your machine
satisfies these requirements.
The Document Centre requires a 115V outlet. The 470/
460/265/255 DC or ST each require a dedicated 20A
circuit. The 240 DC or ST requires a dedicated 15A
circuit.
1. The power receptacle for the machine must meet the
requirements stated on the data plate on the rear of the
machine.
2. The socket outlet shall be installed near the equipment and
shall be easily accessible.
3. Use the power cable that is supplied with your Document
Centre. Do not use an extension cord or remove or modify
the power cord plug.
4. Plug the power cable directly into a correctly grounded
electrical outlet. If you are not sure, consult an electrician.
5. Do not use an adapter to connect the Document Centre to
an electrical outlet that lacks a ground connection terminal.
6. The power cord is the disconnect device for this machine.
7. Do not override or disable electrical or mechanical
interlocks.
8. Do not push objects into slots or openings on the machine.
Electrical shock or fire may result.
9. Do not obstruct ventilation openings. These openings
prevent overheating of the Document Centre.