Zebra Technologies ZEBRA QL UMAN-QLP-001 - Manual (Page 48)

48
QL Plus Series User Guide
Desk Stand
Refer to Figure 19. To
use the Desk Stand: Slide
the printer onto the Desk
Stand. The printer’s belt
clip will hook onto the Desk
Stand as shown and retain
it in place. Ensure that the
clip is securely attached to
the Stand and the media
compartment of the print-
er is seated securely in the
Stand.
Holes are provided to per-
manently attach the Desk
Stand to the work surface.
Charger and data I/O cables
may be plugged into the
printer in the usual manner.
Caution • Do not use the printer while charging a battery with the
LI72 charger.
Desk
Stand
Hook
Belt Clip
over the
Stand
Figure 19: Using the Optional
Desk Stand