York DM 300 User Manual
Technical guide, Description
262259-YTG-E-1008
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
TECHNICAL GUIDE
SINGLE PACKAGE GAS/ELECTRIC UNITS
AND SINGLE PACKAGE AIR
CONDITIONERS
DM 180, 240 & 300
15, 20 & 25 NOMINAL TONS
®
DESCRIPTION
YORK Sunline 2000™ units are convertible single package
high efficiency rooftops. All models have independent dual
refrigerant circuits for efficient part load operation. Although
the units are primarily designed for curb mounting on a roof,
they can also be slab-mounted at ground level or set on steel
beams above a finished roof.
All units include:
•
Powder Paint finish that meets ASTM-B-117 1000 hour
salt spray standards
•
Two-stage cooling provided by dual independent
refrigeration circuits with expansion valves, filter-driers,
high and low pressure/loss of charge switches and
freezestats
•
Scroll compressors (25T model only)
•
Two-stage heating provided by dual independent heat
exchangers with aluminized steel tubes, redundant gas
valves, spark ignition with induced draft logic
•
Permanently lubricated motors
•
Bottom or side air discharge configuration capability
(field convertible)
•
Belt drive blower motor with high static drive option
•
Constant supply air volume (CV) with optional variable
air volume (VAV)
•
Manufactured under the quality standards of ISO9001
•
Simplicity® Control Board
•
Zero-25% fixed air damper with hood
•
Copper tube/aluminum fin coils
•
Hinged filter access and tool free latched doors optional
•
Hinged tool free blower, blower motor, filters and electri-
cal panel access optional
•
Rigging holes in base rails for lifting
•
Single point power connection
•
Complete factory package - tested, charged and wired
•
CSA agency approvals on all units
WARRANTY
•
One-year parts warranty
•
A Five-year parts warranty on the compressors and
electric heat elements
•
Ten-year parts warranty on the gas-fired heat
exchangers
Document Outline
- DESCRIPTION
- TABLE OF CONTENTS
- PRODUCT NOMENCLATURE
- FEATURES
- FACTORY-INSTALLED OPTIONS
- FIELD-INSTALLED ACCESSORIES
- GUIDE SPECIFICATIONS
- GENERAL
- DESCRIPTION
- UNIT CABINET
- INDOOR (EVAPORATOR) FAN ASSEMBLY
- OUTDOOR (CONDENSER) FAN ASSEMBLY
- REFRIGERANT COMPONENTS
- UNIT CONTROLS
- GAS HEATING SECTION (DM***N Models)
- ELECTRIC HEATING (DM***C/E Models)
- UNIT OPERATING CHARACTERISTICS
- ELECTRICAL REQUIREMENTS
- STANDARD LIMITED WARRANTIES
- OTHER PRE-ENGINEERED ACCESSORIES AVAILABLE
- OTHER FACTORY INSTALLED OPTIONS