Xerox 180 NPS - Manual (Page 57)

XEROX DOCUPRINT 96/4635/180 NPS TROUBLESHOOTING GUIDE 8-1
8. 8 Correcting stacking problems
This chapter describes stacker problems other than paper jams. It
suggests corrective actions when printed sets are thrown around the
stacker or the bin. (See “Clearing paper misfeeds and jams” for
stacker paper jams.)
Symptom Probable cause Action
Papers are thrown around the
stacker. Someone unloaded paper by
opening the top cover of the
stacker bin. Unload the bin following the normal procedure.
See “Unloading Stacker bin” in Guide to
Performing Routine Maintenance.).
Paper stack falls over or slides
around the bin Excessive paper curl Try adjusting for paper curl (See “Paper curl
and paper jams” in Guide to Performing
Routine Maintenance
Printing stops and the printer
console displays a message
indicating that an incorrect
paper size is loaded in a
feeder tray. Incorrect paper size or a
damaged sheet. 1. Check the paper in the indicated tray.
2. If the paper is not the correct size, load
the correct size paper or select another
feeder tray containing the correct paper
size.
If the paper size is correct, press the
Continue button to resume printing.