Xerox 180 NPS - Manual (Page 45)

XEROX DOCUPRINT 96/4635/180 NPS TROUBLESHOOTING GUIDE 7-1
7. 7 Adjusting print quality and
speed
This chapter considers means for checking and optimizing print
quality and speed.
Installing the custom transfer assist blade
If you use nonstandard paper sizes, you should install the custom
transfer assist blade to ensure good print quality.
Caution: The custom transfer assist blade comes as a kit with
detailed instructions. Be sure to follow the instructions carefully.
To prevent damage to the printer, have your service representative
show you how to customize and install a custom transfer assist blade
for the first time.
You must use the standard transfer assist blade with standard paper
of the following sizes:
•
In U.S. markets
— 11.1—11.4 inches (282—290 mm)
— 11.8—12.1 inches (300—307 mm)
— 13—13.5 inches (330—343 mm)
• In non-U.S. markets
— 11.1—11.4 inches (282—290 mm)
— 11.8—12.1 inches (300—307 mm)
Note: With these paper sizes, transfer efficiency may be reduced.