Xerox 180 NPS - Manual (Page 39)

CLEARING PAPER MISFEEDS AND JAMS
XEROX DOCUPRINT 96/4635/180 NPS TROUBLESHOOTING GUIDE 5-19
Adjusting the decurler lever
To adjust the decurler lever:
1. Open the right door of the printer and locate the decurler lever.
Figure 5-2. Decurler lever
2. If the print curl is +2 or more, move the green decurler lever to
the right.
3. If the print is -3 or more, move the green decurler lever to the
left.
4. If the decurler adjustment does not eliminate the paper curl
problem, turn the paper stack over in the feeder tray.
5. If there is still a paper curl problem, perform steps 1 to 4 again.
6. If all else fails, insert paper from a new ream.