Zebra Technologies P520 - Manual (Page 60)

RIBBONS FOR PRINTING AND LAMINATION:
NOTE: * These ribbons can possibly be used without using the “O”-Panel.
‡ These ribbons can only be used with the full overlay Part Number
800015-125 and not with the 800015-131.
Only 30 mil cards should be used when the card is
to be laminated.
Use 30 mil composite cards whenever possible to
ensure compliance of the finished card to ISO
flatness guidelines.
APPENDIX C 50
Part Number Description Patch 1 mil Patch 0.6 mil Full Overlay
-012 to -017 -135 to -138 -125 & -131
800015-101 to 109 Monochrome Ribbon no yes yes ‡
800015-140 YMCKO no * no * yes
800015-145 YMCK yes yes no
800015-148 YMCKOK no * no * yes
800015-150 Kdye-0 no * no * yes
800015-160 KO no * no * yes
800015-170 YMC yes yes no
800015-180 YMCKK yes yes no
800015-301 to 309 Monochrome Ribbon no yes yes ‡
800015-340 YMCKO no * no * yes
800015-345 YMCK yes yes no
800015-348 YMCKOK no no yes
800015-350 Kdye-0 no * no * yes
800015-360 KO no * no * yes
PRINTING STATION compatibility LAMINATOR STATION