Zebra Technologies P520 - Manual (Page 16)

OPERATION 6
2 • 2 Loading Printing Ribbons
The P520 Printer requires approved ribbons (see Appendix C). The Resin Thermal
Transfer and Dye Sublimation ribbons and Lamination are specifically designed for
your P520 Printer. For optimum performance and printer life (Print Head), always use
approved ribbons.
DO NOT TOUCH the print head or the electronic
components on the print head carriage.
Discharges ofelectrostatic charge from the human
body or other surfaces can damage the print head
or other
electronic components used in this device.
1 • Remove ribbon from packaging.
2 • With printer power ON and Printer Ready status,
open cover and press down on the Print Head
Unlock Lever to open the print head carriage. The
print head carriage will pop open.