Yamaha AR-100 - Manual (Page 47)

41 4. Voice Controls and Effects
Reverb
Reverb adds an echo-like effect to the sound, giving the impression of a performance in a large
room or concert hall. The effect can be applied equally and simultaneously to all Voices, or set
individually for each section of the AR-100, even independently for rhythm, accompaniment
and effects.
To call up the Reverb pages:
Press the REVERB touch control, then select “Reverb Menu” in the display
with the bottom left Menu button. Select the different Reverb pages by
using the corresponding Menu buttons.
REVERB — GLOBAL Page
1 MODE
Determines the type of Reverb effect: Room, Hall, or Church. Each type simulates a different
acoustic environment; Room is the smallest and Church is the largest.
2 LENGTH
Determines the acoustic liveliness of the simulated room in the effect. Higher settings make
the room more reverberant. Range: 0 – 6
3 DEPTH
Fine adjustment of the depth of reverberation or the level of the
reflected sounds. (Coarse Reverb depth settings are made with
the panel REVERB touch controls.) A setting of 0 effectively
turns off the Reverb effect. Range: 0 – 24
DATA CONTROL COARSE
CONTRAST
PAGE
1 2 3
REVERB
MAX
MIN
When the Depth parameter (or
the panel REVERB control) is
set to the minimum, the
settings in the pages that follow
have no effect.