Yamaha AR-100 - Manual (Page 37)

31 3. Flute/Tibia and Extra Voices
5.
From the EXTRA VOICE page, make additional settings for the Extra Voices.
The EXTRA VOICE page automatically appears when you press one of the EXTRA VOICE
buttons, except when the FLUTE VOICE page is active — in which case you can use the PAGE
buttons to select the EXTRA VOICE page.
1 EFFECT
This determines the effect type (Tremolo or Symphonic) for the Extra Voice sections.
• OFF: Cancels the effect.
• TREM. (Tremolo): Enables Tremolo for the Extra Voice
sections. (To actually turn Tremolo on, use the panel
TREMOLO button. To make changes to the Tremolo settings,
see page 40.)
• SYMPH. (Symphonic): Selects the Symphonic/Celeste effect.
(See page 37).
2 EXTRA VOICE VOLUME (LOWER, UPPER, PEDAL)
Determines the overall Extra Voice level for the Lower and Upper keyboards and Pedalboard,
respectively. Range: 0 – 24
3 EXTRA FEET (LOWER, UPPER)
Determines the octave (or footage) for the Extra Voice Lower and Upper sections. When set
to “PRESET,” the octave setting is normal. “UP” (Lower only) raises the pitch by one octave,
and “DOWN” (Upper only) lowers it by one octave.
6.
If desired, make settings for the Flute/Tibia Voice section(s) and mix them
with the Extra Voice section(s).
1 2 3
The Delay and Flanger effects
cannot be applied to the Extra
Voice sections.