FujiFilm FinePix Real 3D V3 - Manual (Page 26)

20
The Setup Menu
The On/Off Timer
On/Off Timer Setting sets the viewer to automatically turn on at a selected time daily
or on weekdays or weekends and then turn off again at a selected time. For example, to
set the viewer to turn on daily at 10:00 a.m. and turn off at 5:00 p.m.:
1 Select On/Off Timer Setting in the setup menu ( P 19).
2 Highlight Auto Power On/Off and press OK, and then highlight On and press OK to
turn the timer on.
3 Highlight Frequency and press OK, and then highlight Every Day and press OK.
4 Highlight Time Setting and press OK. Set the viewer to turn on at 10:00 and turn off
at 17:00 and press OK.
Q If the remote control is used to turn the viewer on at a time not in the selected period (in the
above example, between the hours of 5:00 p.m. and 10:00 a.m. the following day), the viewer
will turn off automatically after a few minutes. To use the viewer outside the selected times,
select Off for Auto Power On/Off .