FujiFilm FinePix Real 3D V3 - Manual (Page 14)

8
Turning the Viewer On Turning the Viewer On
Connect the supplied AC power adapter and turn the viewer on.
1 Connect the AC power adapter to the viewer as shown
and then plug the adapter into a power outlet.
Q Use only the supplied AC power adapter. Do not use the
viewer with other power adapters.
2 Slide the power switch to ON. A welcome screen will
be displayed and then a product demonstration slide
show will begin.
The Product Demonstration Slide Show The Product Demonstration Slide Show
The viewer ships with a slide show in internal memory consisting of demo images illustrating
some of the product’s key features and accompanied by a background track, which starts auto-
matically when the viewer is turned on (if an external storage device is detected, the viewer will
instead display the images on the device; if devices are found both in the card slot and plugged
into the USB port, the viewer will display the images on the device in the card slot). The images
in the demo slide show can be deleted when the camera is connected to a computer (
P 21).
Q The images and music in the demonstration slide show are deleted when internal memory is
formatted using the System Setup > Format option in the setup menu ( P 19). If you wish to
keep a copy of the slide show, copy the images and music to a computer before formatting
internal memory (
P 21).
Turning the Viewer Off Turning the Viewer Off
To turn the viewer off , slide the power switch to OFF.
R The On/Off Timer Setting option in the setup menu can be used to automatically activate
and deactivate the display ( P 20).
Using the Remote Control Using the Remote Control U (Power) Button (Power) Button
The viewer will not respond to the U button on the remote control when the power switch is
in the OFF position. When the power switch is in the ON position, the U button can be used to
turn the display on and off .