Pause key self test 89, Pause key 89 – Zebra Technologies R-140 User Manual

Page 99

FEED Key Self Test

See Figure 33.

1. Turn off the printer.
2. Press and hold the

FEED key while

turning on the power.

The FEED key self test

prints out at various

darkness settings above

and below that of the

darkness value shown on

the configuration label.

Look at these labels and

determine which one has

the best darkness setting

for your application. This

value can be entered into

the printer by setting the

darkness during the

configuration procedure.

Refer to

for more

information.
The value printed on that label is added to (plus) or subtracted from (minus)

the darkness value specified on the configuration label. The resulting

numeric value (0 to 30) is the best darkness value for that specific

media/ribbon combination.

90 Zebra R-140 User’s Guide

Figure 33