Zebra Technologies R-140 - Manual (Page 76)

Zebra R-140 User’s Guide 67
Press Display Shows Action/Explanation
LANGUAGE
Selecting the Display Language Press the RIGHT or LEFT BLACK
OVAL key to display other choices.
Default: English
Selections: English, Spanish, French, German, Italian,
Norwegian, Portuguese, Swedish, Danish,
Spanish 2, Dutch, Finnish, Custom
This parameter allows you to change the language used on the
front panel display.
RFID TEST
RFID Test Press the left oval key to select the QUICK test or the
right oval key to select the SLOW test.
NOTE: RFID media must be loaded and the appropriate tag type
selected (or choose Autodetect) in order to run this test. Only the
Texas Instruments’ Tag-It  and Philips I • Code  RFID tags are
supported.
QUICK - Perfoms the RFID Test and displays either a PASSED! or
FAILED! result for the entire test. The user is then prompted to
CONTINUE.
SLOW - Performs the same RFID Test but displays the status of
each function tested. There is a one second pause between the
displaying of the result of the current functions test and the
beginning of the next function test. If a particular functions
passes, the user will see an OK! for that function. If a particular
fuction fails, the user will see a FAILED! for that function and then
is prompted to CONTINUE.
RFID TAG TYPE
Selecting the RFID Tag Type Press the right or left oval key to
display other choices.
NOTE: Only the Texas Instruments’ Tag-It  and Philips
Semiconductors’ I • Code  RFID tags are supported.
Default: None Choices: Autodetect, None, Tag-It, ICODE
This parameter allows you to change the type of RFID tag being
used. If the user is unsure of the type of tag being used, select
Autodetect.
RFID ERR STATUS Displays the last RFID error status message received.
You have now completed the entire configuration and calibration sequence. You may either
press the NEXT/SAVE key or the SETUP/EXIT key.