Zebra Technologies R-140 - Manual (Page 116)

The second ^RT command string at block 2, reads two blocks of data in
ASCII format. It retries up to 5 times. The data read will go into the ^FN2
location of the format.
NOTE: The data can be sent back to the host via the ^HV command.
^RS – RFID Setup
The format for the ^RS instruction is:
^RSt
where
t = tag type
Default value: 0 –NONE (No tags available)
Other values:
1- Auto detect (automatically determine the tag type, by querying
the tag)
2- Tag-it (Texas Instruments Tag-it tags)
3- I
• Code (Philips I • Code tags)
^RI - RFID Get Tag Unique ID
The format for the ^RI instruction is:
^RIn
where
n = Field number to store the unique ID
Zebra R-140 User’s Guide 107