Zebra Technologies R-140 User Manual

Page 90

Warning Head Cold

Warning Cutter Jammed

Out of Memory*

Zebra R-140 User’s Guide 81

Problem Solution

The printhead is under temperature.

Continue printing while the printhead reaches the

correct operating temperature. If the error remains,

the environment may be too cold for proper printing.

Relocate the printer to a warmer area.

Problem Solution

Cutter blade is in the media path.

Turn off the printer power and unplug the printer.

Inspect the cutter module for debris and clean as

needed following the cleaning instructions on

Problem Solution

*There is not enough memory to

perform the function shown on the

second line of the error message.

Insufficient DRAM for the label length, downloaded

fonts/graphics, and images.
Ensure that the device, such as FLASH memory or

PCMCIA card, is installed and not write protected or

full.
Ensure that the data is not directed to a device that is

not installed or available.