Zebra ZM400 - Manual (Page 67)

59 Configuration
Print a Configuration Label
3/27/07 ZM400/ZM600 User Guide 79695L-001 Rev. A
Print a Configuration Label
A configuration label lists the printer settings that are stored in configuration memory. After
you load the media, print a configuration label as a record of your printer’s current settings.
Keep the label to use when troubleshooting printing problems.
To print a configuration label, complete these steps:
1. On the control panel, press SETUP/EXIT .
2. Press or to scroll through the parameters until you reach
LIST SETUP
.
3. Press SELECT to select the parameter.
4. Press PLUS (+) to confirm printing.
A configuration label prints ( Figure 11 ).
Figure 11 • Configuration Label