Zebra ZM400 - Manual (Page 44)

Operations
Load Media 36
79695L-001 Rev. A ZM400/ZM600 User Guide 3/27/07
Additional Steps for Tear-Off Mode
After completing Beginning Steps for all Print Modes and Printer Options on page 33 ,
continue with this section to operate the printer in Tear-Off mode.
To operate the printer in Tear-Off mode, complete these steps:
1. Slide in the media guide until it touches the outer edge of the media.
2. Set the printer to Tear-Off mode. See Select Print Mode on page 64 for instructions.
3. Close the printhead assembly.
4. If the printer is paused (the Pause light is on), press PAUSE to enable printing.