Table 11 – Zebra ZM400 User Manual
Page 62
Operations
Adjust Printhead Pressure
54
79695L-001 Rev. A
ZM400/ZM600 User Guide
3/27/07
2.
If necessary, adjust the pressure adjustment dials as follows:
Table 11 • ZM600 Printhead Pressure
Media Width
Inside Dial
Outside Dial
2 in. (50 mm)
6
1
3 in. (75 mm)
6
2
4 in. (100 mm)
7
3
5 in. (125 mm)
7
4
5.5 in. and up (140 mm and up)
6
6
If the media...
Then...
Requires higher pressure to
print well
Increase both dials one position.
Shifts left while printing
Increase the outside dial setting one position, or
decrease the inside dial setting one position.
Shifts right while printing
Increase the inside dial setting one position, or
decrease the outside dial setting one position.
Prints too lightly on the left side
of the label.
Increase the inside dial setting one position.
Prints too lightly on the right
side of the label.
Increase the outside dial setting one position.