Zebra ZM400 User Manual
Page 45
37
Operations
Load Media
3/27/07
ZM400/ZM600 User Guide
79695L-001 Rev. A
Additional Steps for Peel-Off Mode (with or without Liner Take-Up)
After completing
Beginning Steps for all Print Modes and Printer Options on page 33
continue with this section to operate the printer in Peel-Off mode with or without liner take-up.
Your printer must have the Peel option, the Liner Take-Up option, or the Rewind option
installed. See
Print Modes and Printer Options on page 30
for more information.
For additional procedures related to the rewind option, see
To operate the printer in Peel-Off mode, complete these steps:
1.
Extend the media approximately 18 in. (500 mm) out of the printer.
2.
Remove the exposed labels so that only the liner remains.
This manual is related to the following products: