Zebra ZM400 - Manual (Page 101)

93 Routine Maintenance
Cleaning Procedures
3/27/07 ZM400/ZM600 User Guide 79695L-001 Rev. A
Clean the Media Compartment and Sensors
To clean the media compartment and sensors, complete these steps:
1. Brush or vacuum any accumulated paper lint and dust away from the media and ribbon
paths.
2. Brush or vacuum any paper lint and dust away from the sensors (see Figure 16 ).
Figure 16 • Cleaning the Sensors
1
Take-label sensor
2
Ribbon sensor
3
Media sensor
1
3
2