Zebra ZM400 - Manual (Page 20)

Introduction
Control Panel 12
79695L-001 Rev. A ZM400/ZM600 User Guide 3/27/07
Control Panel Lights
Table 2 • Control Panel Lights
Light Status Indication
POWER Off The printer is off, or no power is applied.
On The printer is on.
PAUSE Off Normal printer operation.
On The printer has stopped all printing operations.
Flashing The Pause light flashes when initializing FLASH memory and in
Peel-Off Mode when the label is available.
ERROR Off Normal printer operation (no errors).
On An error condition is preventing printing. This includes MEDIA
OUT
and
RIBBON OUT
errors.
Flashing An error condition exists, but printing is allowed to continue. This
includes
RIBBON IN
warning,
HEAD UNDER TEMP
warning,
and HEAD OVER TEMP error.
DATA Off Normal printer operation (no data being received or processed).
One flash CANCEL was pressed and a format is successfully cancelled.
Slow flashing The printer cannot accept more data from the host.
Fast flashing The printer is receiving data.
On A partial format has been received and no subsequent data activity.