Xerox 701P47301 - Manual (Page 52)

A - 6 IPDS User Guide
NOTE: The printer IP Address is specified during the initial
software load. Set the TCP/IP port number in the IPS Manager
System Configuration dialog.
2. Infoprint Manager procedure (Refer to the Infoprint Manager
for Windows: Introduction and Planning Guide and the
Infoprint Manager for Windows: Getting Started)
Reference Documents - Windows
The following documents provide additional information on
WIndows-to-IPDS printer connectivity.
Table A-4. Reference Documents - Windows
IBM Infoprint Manager for Windows manuals are available on the
IBM website.
Testing the Printer Connection
Test the printer by one of the following methods to ensure the
system can make a connection with the Xerox FreeFlow Print
Server IPDS printer:
• Ping the printer from your system to establish a connection
with the TCP/IP attached Xerox FreeFlow Print Server IPDS
system.
• Send a job from the host through PSF or Infoprint Manager
(depending on your host) to print on the Xerox FreeFlow Print
Server IPDS system.
Title Publication
number
Infoprint Manager for Windows: Introduction and
Planning Guide G544-5716
Infoprint Manager for Windows: Getting Started G544-5717
IBM Infoprint Manager for Windows: Procedures G544-5814
IBM Infoprint Manager Reference S544-5475