Xerox 701P47301 - Manual (Page 47)

IPDS User Guide A- 1
Xerox FreeFlow® Print Server IPDS Network Connectivity Appendix
A Xerox FreeFlow
®
Print
Server IPDS Network
Connectivity Appendix
Overview
This appendix describes the process of configuring various
systems to communicate and print on a Xerox FreeFlow Print
Server with IPDS using TCP/IP or channel attachment.
Supported environments include:
• IBM z/OS
®
• IBM i5/OS
®
• IBM Infoprint
®
Manager for AIX
®
• IBM Infoprint
®
Manager for Windows
®
The purpose of this appendix is to help the customer support staff
through the system configuration process, and to provide tips,
pointers, and references to more information.
Configuring IBM z/OS
This section discusses the parameters and procedures required to
define a Xerox FreeFlow Print Server IPDS printer to your System
z series
host.
This section is applicable to both JES2 and JES3 environments.
Differences between the two are indicated in notes; otherwise,
they are collectively referenced to as “JES”.
TCP/IP Configuration Overview - z/OS
Configuring the Xerox FreeFlow Print Server IPDS printer with
TCP/IP on the z/OS system involves setting up 4 components:
1. IPS Manager System Configuration Menu (Refer to System
Configuration ).
NOTE: The printer IP Address is specified during the initial
software load. Set the TCP/IP port number in the IPS Manager
System Configuration dialog.