Xerox 701P47301 - Manual (Page 51)

IPDS User Guide A- 5
Xerox FreeFlow® Print Server IPDS Network Connectivity Appendix
NOTE: The printer IP Address is specified during the initial
software load. Set the TCP/IP port number in the IPS Manager
System Configuration dialog.
2. Infoprint Manager procedure (Refer to the Infoprint Manager
for AIX: Introduction and Planning Guide and the Infoprint
Manager for AIX: Getting Started)
Reference Documents - AIX
The following documents provide additional information on AIX-to-
IPDS printer connectivity.
Table A-3. Reference Documents - AIX
IBM Infoprint Manager for AIX manuals are available on the IBM
website.
Configuring IBM Infoprint Manager for Windows
This section provides information on using TCP/IP to attach a
Xerox FreeFlow Print Server IPDS printer to a Windows system
using Infoprint Manager for Windows.
Configuration Overview - Windows
Configuring the Xerox FreeFlow Print Server IPDS printer with
TCP/IP on the Windows system involves setting up 2 components:
1. IPS Manager System Configuration Menu (Refer to System
Configuration ).
Title Publication
number
Infoprint Manager for AIX: Introduction and
Planning Guide G544-5833
Infoprint Manager for AIX: Getting Started G544-5817
IBM Infoprint Manager for AIX: Procedures G544-5815
IBM Infoprint Manager for AIX: Installation
Instructions G544-5891
IBM Infoprint Manager Reference S544-5475