Xerox 701P47301 - Manual (Page 49)

IPDS User Guide A- 3
Xerox FreeFlow® Print Server IPDS Network Connectivity Appendix
Reference Documents - z/OS
The following documents provide additional information on z/OS-
to-IPDS printer connectivity.
Table A-1. Reference Documents - z/OS
IBM z/OS manuals are available on the IBM website.
Configuring IBM i5/OS
This section describes the process of configuring an i5/OS system
to communicate and print on a Xerox FreeFlow Print Server IPDS
printer using TCP/IP on a System i series server.
Configuration Overview - i5/OS
Configuring the Xerox FreeFlow Print Server IPDS printer with
TCP/IP on the i5/OS system involves setting up 3 components:
1. IPS Manager System Configuration Menu (Refer to System
Configuration ).
NOTE: The printer IP Address is specified during the initial
software load. Set the TCP/IP port number in the IPS Manager
System Configuration dialog.
2. TCP/IP for i5/OS parameters (Refer to System i Networking
TCP/IP Setup)
Title Publication
Number
Print Services Facility for z/OS: Customization S550-0427
z/OS Communications Server IP Configuration
Reference SC31-8776
z/OS JES2 Initialization and Tuning Guide SA22-7532
z/OS JES2 Initialization and Tuning Reference SA22-7533
z/OS JES3 Initialization and Tuning Guide SA22-7549
z/OS JES3 Initialization and Tuning Reference SA22-7550
z/OS JES3 Hardware Configuration Definition (HCD)
User's Guide SC33-7988
z/OS Infoprint Server Customization S544-5744
z/OS Infoprint Server Operation and Administration S544-5745