Printing a test job from the host, Printing a test job from the host -12 – Xerox 701P47301 User Manual

Page 22

Text mode
Original mode

2 - 1 2

IPDS User Guide

Installation and Setup

Print Server IPDS Tray 1 from US Letter to A4. In IPS Manager,
you must map a medium to each Xerox FreeFlow® Print Server
IPDS tray specified in the IPDS data stream.

For the installation verification jobs, use US Letter or A4 media.
Refer to the IPS Manager on-line help for the specific procedures.

Printing a Test Job From the Host

To verify host-to-printer communications, perform these steps to
print a test job from the host:

1. Ensure Xerox FreeFlow® Print Server IPDS is running and is

reporting a status of FreeFlow® Print Server IPDS Idle.

2. Start the logical printer from the host and verify that it is active.

3. Send an IPDS print data stream from the host to the print

server.