Zebra S4M User Manual
Page 89
83
Routine Maintenance
Cleaning Procedures
10/21/05
S4M User Guide
13290L-001 Rev. A
6.
Use the swab to remove excess adhesive from the tear-off/peel-off bar. Allow the solvent
to evaporate.
7.
Close the printhead assembly and the media door.
The printer is ready to operate.
Important •
Apply minimum force when cleaning the tear-off/peel-off bar. Excessive
force can cause the tear-off/peel-off bar to bend, which could have a negative effect on
peel performance.