Zebra S4M - Manual (Page 18)

Introduction
Control Panel 12
13290L-001 Rev. A S4M User Guide 10/21/05
Control Panel Lights
Table 2 describes lights on the control panel that indicate different printer conditions.
Table 2 • Control Panel Lights
Light Appearance Function/Description
POWER Indicates that the printer is on.
ALERT In an error or alert situation, the ALERT light operates as follows:
• Remains on (solid) when the printer requires operator attention,
such as when the print mechanism is open.
• Flashes when the ribbon or media is out.
PAUSE (part of the
PAUSE button)
Flashes when the printer is in Pause mode unless the printer enters
Setup mode and the down arrow becomes active.
FEED (part of the
FEED button)
On during normal printer operation, indicating that the printer can
feed a blank label.
CANCEL (part of
the
CANCEL button)
On when canceling a label format is a valid option.
POWER
ALERT
PAUSE
FEED
CANCEL