Clean the media compartment and sensors – Zebra S4M User Manual
Page 87
81
Routine Maintenance
Cleaning Procedures
10/21/05
S4M User Guide
13290L-001 Rev. A
Clean the Media Compartment and Sensors
To clean the media compartment and sensors, complete these steps:
1.
Brush or vacuum any accumulated paper lint and dust away from the media and ribbon
paths.
2.
Brush or vacuum any paper lint and dust away from the sensors (see
).
Figure 28 • Cleaning the Sensors
1
Take-label sensor
2
Ribbon sensor
3
Transmissive sensor
4
Reflective sensor
1
3
4
2