Load media in peel-off mode, Load – Zebra S4M User Manual
Page 42
Operations
Load Media in Peel-Off Mode
36
13290L-001 Rev. A
S4M User Guide
10/21/05
Load Media in Peel-Off Mode
This section applies only if the Peel-Off option is installed (
Figure 18 • Peel-Off Mode
To load media in Peel-Off mode, complete these steps:
1.
Set the printer to Peel-Off mode. See
Select the Label Removal Method on page 63
instructions.
2.
Insert the media in the printer. See
Inserting Media into the Printer on page 31
for
instructions.
4
5
6
8
9
10
13
11
12
1
2
3
1
Peel lever
8
Dancer
2
Tear-off/peel-off bar
9
Media guide
3
Printhead assembly
10
Printhead release latch
4
Transmissive sensor
11
Peel assembly
5
Media supply guide
12
Label
6
Media supply hanger
13
Label liner
7
Liner take-up spindle