Zebra Technologies ZebraNet ZM400TM - Manual (Page 83)

83 ZebraLink WebView
Alert Setup
04/19/2007 ZebraNet
®
10/100 Internal Print Server for ZM400 and ZM600 User Guide 14197L-001 Rev. A
9. Enter a valid email address to send the alert messages to.
10. Click Add Alert Message .
To receive email alert, you must give 10/100 Internal PS the IP address of your mail server
that is running SMTP.
11. To save current settings, click Save Printer Setting .
12. Enter the password and click Save Current Configuration .
13. You can continue to add more Alerts, if finished:
• From the Printer Home Page, select PrintServer Settings > Network Communications
Setup .
• Click SMTP Email Alerts .
• Specify your SMTP server address.
When these steps are done, you can begin receiving email notification messages.
Example • [email protected] (The Port field can be ignored for
email setup.)
Important • A password is required. If you forget to enter the password, the alerts you just
set are deleted.
Note • The SMTP Server address might be referred to as Mail Server address.