Zebra Technologies ZebraNet ZM400TM - Manual (Page 78)

ZebraLink WebView
Alert Setup 78
14197L-001 Rev. A ZebraNet
®
10/100 Internal Print Server for ZM400 and ZM600 User Guide 04/19/2007
Setting Alerts
Your 10/100 Internal Print Server allows you to configure your printer to send unsolicited
Alerts.
Table 7 shows the conditions that can trigger alerts.
This section has step-by-step instructions for setting up an alert using ZebraLink™. For
information on setting up alerts using ZebraNet View, see
ZebraNet Utilities on page 93 .
Table 7 • Alerts
Alert Type Error Condition
ZebraLink Alerts • Media out
• Ribbon out
• Printhead over-temp warning
• Printhead under-temp warning
• Head open
• Power supply over-temp
• Ribbon warning (in direct-thermal mode)
• Rewind full
• Cut error
• Printer paused
• PQ job completed
• Label taken
• Head element out
• Power on
Important • If you do not have a ZebraLink-enabled printer, these steps will not work.