Zebra Technologies ZebraNet ZM400TM User Manual
Page 107
107
ZebraNet Utilities
ZebraNet Connect IP
04/19/2007
ZebraNet
®
10/100 Internal Print Server for ZM400 and ZM600 User Guide
14197L-001 Rev. A
6.
If the port you want to add is listed in the Ports Available on Local Subnet window, select
the port name. If the port you want to use is not listed, you can:
•
Select
Cancel
and repeat step 5 to rediscover the print servers.
•
In ZebraNet Connect, click the
Locate Non-local Device
button and enter the static
TCP/IP Address used for the 10/100 Internal PS.
7.
Click
Add
.
8.
To close the Printer Ports dialog, click
Cancel
.
9.
To save the configuration, click
OK
.
Now you can use ZebraNet Connect. Whenever you print to the Windows printer configured
with ZebraNet Connect, your print job will go directly to the ZebraNet 10/100 Internal PS
port.
Windows 95/98/Me
To set up a 10/100 Internal PS port using Windows 95/Windows 98/Me, complete
these steps:
1.
From the task bar, select
Start > Settings > Printers
.
2.
Select the Windows printer that you want to print with ZebraNet Connect IP.
3.
From the file menu, select
File > Properties
.
4.
To add a ZebraNet Connect IP port, in the Details tab select
Add Port
.
5.
From the Add Port dialog, select
Other,
then select the
ZebraNet Connect Monitor
as the
type of port to add.
6.
Click
OK
.
The Add ZebraNet Connect Port screen opens. There is a list of all 10/100 Internal PS
devices discovered on the network.
•
The TCP/IP monitor searches only the local subnet.
Note •
The ZebraNet Connect for TCP/IP DHCP discovery feature relocates a
10/100 Internal PS device on the local subnet by its port name, even if the IP address
changes. This feature is enabled on the local subnet only. A non-local 10/100 Internal PS
device is not rediscovered if the IP address changes.
Note •
Under Windows 95, you have to set up the printer for a local port first, then open
Properties from the File menu and continue with the configurations.
Note •
If ZebraNet Connect IP is not listed, verify that the software has been properly
installed.