Zebra Technologies ZebraNet ZM400TM - Manual (Page 70)

ZebraLink WebView
WebView 70
14197L-001 Rev. A ZebraNet
®
10/100 Internal Print Server for ZM400 and ZM600 User Guide 04/19/2007
Figure 30 • Primary/Secondary Settings Page
5. If you wish to load network settings from the external print server, click YES .
6. To change the primary network, click on the Primary Network drop-down. Select either
Wired or Wireless print server as your primary network.
Table 6 outlines priorities and identifies which device becomes the active print server
when multiple print servers are installed.
7. Click Submit Changes to apply your changes or click Reset Changes to revert back to
previous settings.
Figure 31 opens to confirm your settings have been temporarily saved.