Zebra Technologies ZebraNet ZM400TM - Manual (Page 39)

39 Getting Started
Defaulting the 10/100 Internal PS
04/19/2007 ZebraNet
®
10/100 Internal Print Server for ZM400 and ZM600 User Guide 14197L-001 Rev. A
WebView
To default the 10/100 Internal PS to factory settings using WebView, complete
these steps:
1. From the ZebraNet PrintServer view, click Factory Print Server Settings .
The Restore to Factory Defaults page opens:
Figure 10 • Restore to Factory Defaults
2. Enable the check box for the settings you want to reset, and click Submit Changes .
Important • During the reset cycle, the web pages are unavailable. Upon completion,
check the IP address of the 10/100 Internal PS as it may have changed during the reset
cycle.