Defaulting the 10/100 internal ps, Control panel – Zebra Technologies ZebraNet ZM400TM User Manual
Page 38
Getting Started
Defaulting the 10/100 Internal PS
38
14197L-001 Rev. A
ZebraNet
®
10/100 Internal Print Server for ZM400 and ZM600 User Guide
04/19/2007
Defaulting the 10/100 Internal PS
This section provides you with instructions for defaulting the 10/100 Internal PS to factory
settings using the control panel, WebView, and ZebraNet View.
Control Panel
To default the 10/100 Internal PS to factory settings using the control panel,
complete these steps:
1.
From the control panel, press
Setup/Exit
two times
.
2.
Press
Plus (+ key)
five times.
The control panel will read
DEFAULT NET.
3.
Press
Setup/Exit
to save the change.
4.
After the printer defaults all settings, the control panel will show
PRINTER READY.
This manual is related to the following products: