Zebra Technologies ZebraNet ZM400TM - Manual (Page 67)

67 ZebraLink WebView
WebView
04/19/2007 ZebraNet
®
10/100 Internal Print Server for ZM400 and ZM600 User Guide 14197L-001 Rev. A
Setting the Primary Network Print Server
The ZM400 and ZM600 printers support the simultaneous installation of an internal, external,
and a wireless print server. Even though all three print servers may be installed, only one is
connected to the network and is the active print server.
Table 6 outlines priorities and identifies
which device becomes the active print server when multiple print servers are installed.
Table 6 • Primary Print Server
This section provides you with steps for changing the primary network.
To change the primary network, complete these steps:
1. From the Printer Home Page, click View and Modify Printer Settings .
The View and Modify Printer Settings page opens.
If the
Primary
Network
is set
to:
Installed and Connected to a Live
Ethernet Network Then, the
Active Print
Server will be:
Internal External Wireless*
Wired
X X X Internal
X X External
X Wireless
Wireless
X X X Wireless
X X Internal
X External
*NOTE: A Wireless Option board must have an active radio that can properly associate to an
access point.