ZyXEL Communications Prestige 645R-A Series - Manual (Page 99)

Prestige 645R-A Series User’s Guide
Ethernet Setup 11-1
Chapter 11
Ethernet Setup
This chapter covers how to configure your wired Local Area Network (LAN) settings.
11.1 Ethernet Setup
This section describes how to configure the Ethernet using Menu 3 — Ethernet Setup. From the main
menu, enter 3 to display menu 3.
Figure 11-1 Menu 3 Ethernet Setup
11.1.1 General Ethernet Setup
This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You seldom
need to filter Ethernet traffic; however, the filter sets may be useful to block certain packets, reduce traffic
and prevent security breaches.
Figure 11-2 Menu 3.1 General Ethernet Setup
If you need to define filters, please read the Filter Set Configuration chapter first, then return to this menu
to define the filter sets.
Menu 3.1 - General Ethernet Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Menu 3 - Ethernet Setup
1. General Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number: