ZyXEL Communications Prestige 645R-A Series - Manual (Page 183)

Prestige 645R-A Series User’s Guide
System Information and Diagnosis 19-9
Follow the procedure next to get to Diagnostic:
Step 1. From the main menu, type 24 to open Menu 24 – System Maintenance.
Step 2. From this menu, type 4. Diagnostic to open Menu 24.4 – System Maintenance – Diagnostic.
Figure 19-9 Menu 24.4 System Maintenance : Diagnostic
The following table describes the diagnostic tests available in menu 24.4 for and the connections.
Table 19-4 Menu 24.4 System Maintenance Menu : Diagnostic
FIELD DESCRIPTION
Reset ADSL Re-initialize the ADSL link to the telephone company.
Ping Host Ping the host to see if the links and TCP/IP protocol on both systems are working.
Reboot System Reboot the Prestige.
Command Mode Type the mode to test and diagnose your Prestige using specified commands.
Host IP Address If you typed 12 to Ping Host, now type the address of the computer you want to ping.
19.6 Command Interpreter Mode
The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same
functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from
the SMT by selecting menu 24.8. See the included disk or the zyxel.com web site for more detailed
information on CI commands. Enter 8 from Menu 24 — System Maintenance. A list of valid commands
can be found by typing help or ? at the command prompt. Type “exit” to return to the SMT main menu
when finished.
Menu 24.4 - System Maintenance – Diagnostic
ADSL
1. Reset ADSL
TCP/IP
12. Ping Host
System
21. Reboot System
22. Command Mode
Enter Menu Selection Number:
Host IP Address= N/A