beautypg.com

ZyXEL Communications Prestige 645R-A Series User Manual

Page 159

background image

Prestige 645R-A Series User’s Guide

Filter Configuration

17-9

Table 17-3 Menu 21.x.1 TCP/IP Filter Rule

FIELD DESCRIPTION

EXAMPLE

Filter #

This is the filter set, filter rule coordinates, for instance, 2,
3 refers to the second filter set and the third filter rule of
that set.

6,1

Filter Type

Use [SPACE BAR] and then [ENTER] to choose a rule.
Parameters displayed for each type will be different.
Choices are TCP/IP Filter Rule or Generic Filter Rule.

TCP/IP Filter Rule

Active

Select Yes to activate or No to deactivate the filter rule.

No

(default)

IP Protocol

This is the upper layer protocol, for example, TCP is 6,
UDP is 17 and ICMP is 1. The value must be between 0
and 255. A value of O matches ANY protocol.

0 to 255

IP Source Route

IP Source Route is an optional header that dictates the
route an IP packet takes from its source to its destination.
If Yes, the rule applies to any packet with an IP source
route. The majority of IP packets do not have source
route.

No

(default)

Destination:

IP Addr

Type the destination IP address of the packet you want to
filter. This field is ignored if it is 0.0.0.0.

IP address

IP Mask Type the IP mask to apply to the Destination: IP Addr

field.

IP mask

Port # Type the destination port of the packets you want to filter.

The field range is 0 to 65535. A 0 field is ignored.

0 to 65535

Port # Comp Select the comparison to apply to the destination port in

the packet against the value given in Destination: Port #.
Choices are None, Less, Greater, Equal or Not Equal.

None

Source:

IP Addr

Type the source IP Address of the packet you want to
filter. A 0.0.0.0 field is ignored.

IP address

IP Mask Type the IP mask to apply to the Source: IP Addr field.

IP mask

Port # Type the source port of the packets you want to filter. The

range of this field is 0 to 65535. A 0 field is ignored.

0 to 65535

Port # Comp Select the comparison to apply to the source port in the

packet against the value given in Source: Port # field.
Choices are None, Less, Greater, Equal or Not Equal.

None