Xerox 96 - Manual (Page 92)

PAPER PERFORMANCE GUIDELINES
B-2 XEROX DOCUPRINT 96/4635/180 IPS SYSTEM OVERVIEW GUIDE
Table B-2. Trays 3, 4, 5 and 6 (or high capacity trays)
performance guide
Paper Superior performance Good performance
Performance limits and
suggested alternatives
Size range 1 8 by 10 to 11.69 by 17 inches/
203 by 254 to 297 by 432 mm.
Includes:
•
11 by 14 inches
• 11 by 17 inches
• B4 (250 by 353 mm)
• A3 (297 by 420 mm)
Smaller or larger sizes cannot
be used.
Weight range 20 to 110 pounds/80 to 200
gsm 16 to 20 pounds/60 to 80 gsm 2 Weights outside the limits
shown are not recommended.
Capacity Tray 3: 2600 sheets, 20 pound/
80 gsm paper
Tray 4: 2600 sheets, 20 pound/
80 gsm paper
For greater capacity, use the
Autoswitch feature.
Type or condition • Xerographic paper in
good condition
•
Predrilled stock (fanned
thoroughly)
• Slightly curled paper 3
• Manual two-sided
(duplex) prints
•
High speed label stock
• Excessively curled
paper
4
•
Curl direction should be
determined before
loading paper into tray.
5
• DO NOT use mylar
reinforced paper in trays
3, 4, 5 or 6. Hardware
damage may result. Use
trays 1 or 2.
1. Optional 7 X 10 enablement kit allows 7 by 10 inches/178 by 254 mm paper size.
2. Make sure that heavy weight paper levers (located in areas 2 and 4 of the printer) are in the appropriate
position for the weight of paper being used.
3. Curl direction should be determined before loading paper into trays. For additional information, refer to the
“Clearing paper misfeeds and jams” chapter in your Xerox DocuPrint 96/4635/180 Troubleshooting Guide.
4. Curl direction should be determined before loading paper into trays. For additional information, refer to the
“Clearing paper misfeeds and jams” chapter in your Xerox DocuPrint 96/4635/180 Troubleshooting Guide.
5. Curl direction should be determined before loading paper into trays. For additional information, refer to the
“Clearing paper misfeeds and jams” chapter in your Xerox DocuPrint 96/4635/180 Troubleshooting Guide.