Xerox 96 - Manual (Page 62)

MICR IPS
5-2 XEROX DOCUPRINT 96/4635/180 IPS SYSTEM OVERVIEW GUIDE
Check Performance Guarantee Xerox’s Check Performance Guarantee means Xerox stands behind
the performance of its MICR printers and inks. However, if any E13B
or CMC7 font is used other than the ones supplied by Xerox, this
guarantee is invalidated.
300/600 dpi resolution The 96/4635/180 MICR IPS receives data at 300 dpi and interpolates
it to print at 600 dpi. All AFP resources, including fonts, required for
MICR print jobs must be available at 300 dpi. Print image size can be
up to 14.33 by 17 inches.
Note: Non-MICR 240 dpi fonts must be converted to 300 dpi before
they can be used on the 96/4635/180 MICR IPS.
Transfer Assist Blade When you enable MICR from the MICR Mode window, the IPS
makes adjustments so that the MICR line on your documents prints
all the way to the edges of the paper with no fading or lightening. To
ensure reliable print quality of the entire MICR line, you must have
the Transfer Assist Blade installed in your 96/4635/180 MICR IPS
printer.
Note: The Custom Transfer Assist Blade should be used on your
96/4635/180 MICR IPS when you are using nonstandard paper
sizes. This will ensure acceptable MICR line quality.
Check example The following figure shows a check (U. S.) printed with a MICR line.
The entire MICR line, which consists of numbers and symbols, is
printed in magnetic ink.
Figure 5-1. Example of a check with MICR line (U. S.)
ERA
ERA CORPORA TION P. O. BOX 9968 KENAN,N.Y.146008
PAYR OLL ACCOUNT
PAYTOTHE ORDER OF
SECURITY TRUST COMP ANY OF KENEAN, N.Y.
06-29-84
V OID AFTER 90 D A YS
50-16
223
1962721
$980.28 $* * * *980 28 DOLLARS CENTS
NOT NEGOTIABLE
JEAN L.MAGNIN
484 NORTH PROSPECT
CARUBA BEACH, CA 80297
PAYABLE IF DESIRED AT SOUTHERN PACIFIC
NATIONAL TRUST AND SAVINGS ASSOC.
OMAHA, NEBRASKA
12-35/9290
MICR Line