Xerox 96 - Manual (Page 57)

PRINTERS
XEROX DOCUPRINT 96/4635/180 IPS SYSTEM OVERVIEW GUIDE 4-15
Configurations supporting bypass transport and Input Enablement kit
The Input Enablement kit and/or bypass transport are supported on
the 96/4635/180 IPS configurations as follows:
96 IPS configurations Input Enablement Kit and/or bypass transport:
•
Inverter feeder/stacker only
• Inverter feeder/stacker + feeder/stacker
4635 IPS configurations Input Enablement kit and/or bypass transport:
• Inverter feeder/stacker + feeder/stacker
•
Inverter feeder/stacker + feeder/stacker + feeder/stacker
180 IPS configurations Input Enablement kit and/or bypass transport:
•
Inverter feeder/stacker + feeder/stacker
•
Inverter feeder/stacker + feeder/stacker + feeder/stacker
Input Enablement kit only (no bypass transport):
Inverter feeder/stacker + feeder/stacker + feeder/stacker + feeder/
stacker + feeder/stacker.
Additional IPS printer features
Additional features of the DocuPrint 96/4635/180 IPS printers
include:
Instruction labels Located throughout the printer to assist you with jam clearance and
other tasks.
Power saver To conserve energy, the printer has a power saver in the fuser. After
a predetermined period, it times itself out and shuts down. The time-
out period can be adjusted by a service representative to meet your
needs. The Printer Controller automatically brings the printer out of
power saver mode when there is a document to be printed.
The power saver times itself out after about four hours and requires
four to seven minutes to warm up.