Xerox 96 - Manual (Page 13)

XEROX DOCUPRINT 96/4635/180 IPS SYSTEM OVERVIEW GUIDE 1-1
1. 1 System overview
This chapter introduces the DocuPrint 96 and 96 MICR IPS, the 4635
and 4635 MICR IPS, and the DocuPrint 180 and 180 MICR IPS
printing systems. It describes the systems’ hardware and software
components, features, functions, and modes of operation.
Functional overview of the DocuPrint IPS
The 96 IPS, 96 MICR IPS, 4635 IPS, 4635 MICR IPS, 180 IPS, and
the 180 MICR IPS print high quality documents in simplex or duplex
mode at high speeds.
DocuPrint IPS printers support:
• Duplex printing
• Media handling of multiple weights, sizes, and types
•
Optional modules for enhanced finishing and output to third-
party finishing devices
• Optional enabling of third-party roll feeders
•
Optional high-capacity feeder which provides additional feeder
trays.
The IPS emulates an IBM AFP Group 3 page printer with the
Advanced Function Image and Graphics (AFIG) option and can print
in all the following PSF environments:
• MVS
•
VM (channel-attached only)
•
VSE (channel-attached only)
• OS/2
•
OS/400 (with TCP/IP only)
• AIX
Note: Although PSF/VSE does not support TCP/IP directly, a
printing system with PSF/2, PSF/6000, or IBM InfoPrint Manager can
attach to a PSF/VSE system and the PSF/2, PSF/6000, or IBM
InfoPrint Manager can furnish the TCP/IP support for the IPS printer.
For information on the minimum PSF levels needed to support the
IPS, refer to your Xerox DocuPrint 96/4635/180 IPS Installation
Planning Guide.