Xerox 96 - Manual (Page 47)

PRINTERS
XEROX DOCUPRINT 96/4635/180 IPS SYSTEM OVERVIEW GUIDE 4-5
4. Tools icon
Select this icon to display call for service information and to
adjust display features of the printer control console (for
example, alarm loudness).
5. Guarded Tools icon
This icon is reserved for the service representative and
operators who have completed Advanced Customer Training
(ACT).
6. Clear button
Select this button to clear fault messages.
7. Continue button
Press this button to resume printing.
8. Stop button
Press this button to stop printing.
9. Sample button
Press this button to print a sample to the sample tray.
Note: The following software levels are required for the
sample button to function:
• 96 IPS: 21.50 or higher
•
4635 IPS: 11.51 or higher
• 180 IPS: 70.10 or higher
Note: Once pressing the Sample button, the message
Sample is being delivered is displayed on the printer
console, and remains there until another message overwrites
it.
Note: The sample button is disabled during MICR print
jobs.
10. Brightness control thumbwheel
Use this thumbwheel to adjust the brightness of the printer
control console display.
11. Icons
Area where the following icons appear:
Fault icon — Appears when a fault exists in the system that
stops the printer or prevents it from printing. If you click this
button, the Clear button is displayed on the screen.
Hint icon — Appears when a masked fault or condition exists in
the printer. See the chapter “Fault masking” in the Xerox
DocuPrint 96/4635/180 IPS Troubleshooting Guide.