Xerox 96 - Manual (Page 34)

PRINTER CONTROLLER
2-4 XEROX DOCUPRINT 96/4635/180 IPS SYSTEM OVERVIEW GUIDE
Diskette drive
The floppy disk drive is located in the processor, on the front section
of the UltraSPARC. It uses industry standard 3.5 inch, 1.44-MB,
double-sided, high-density floppy disks. This disk drive is not an input
source for print jobs or for any other data or application. It is reserved
exclusively for use by a service representative to update software
and to store files.
CD-ROM drive
The CD-ROM drive, located in the processor above the diskette
drive, is a high-density, read-only, optical laser storage device used
for loading the IPS operating system, online documentation, and
other files.
Cartridge tape drive
An optional 8 GB, 4 mm external SCSI cartridge tape drive also is
available for the IPS. Like the diskette and CD drives, this tape drive
is not an input source for print jobs or for any other data or
application. It provides the service representative with another
means of loading system maintenance files or saving diagnostic
information.
Monitor
The monitor has a high-resolution color screen, which displays the
IPS graphical user interface screen.
Keyboard
The type 4 or 5 keyboard has 107 alphanumeric keys, symbol and
special character keys, an extended character set, and function keys.
Mouse
The mouse has three buttons. The left and right buttons are used to
select IPS functions. The center button provides additional functions
that you will not be required to use.
If your workstation has an optical mouse, it must remain on its
designated metallic pad to be active. If the mouse has a roller ball
instead of an optical sensor underneath, it requires a non-metallic
pad.