Yamaha CVP-59S - Manual (Page 62)

59
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Registration Memory
X
Select a Registration Bank (if necessary)
.............................
Any of the 5 or 3 Registration Memory banks can be selected by
pressing the [BANK] button and selecting the desired bank via the pop-
up display LCD buttons (
A through E in the CVP-79A/69/69A, and A
through C in the CVP-59S).
MEMORY BANK 1 2 3 4 5
REGISTRATION
ABC FREEZE
C
Register the Settings
....................................................................................
While holding the [MEMORY] button, press one of the [REGIS-
TRATION] buttons. Any data that was previously in the selected loca-
tion is erased and replaced by the new settings. The corresponding Regis-
tration Memory number will appear next to the “
R ” symbol in the dis-
play.
MEMORY BANK 1 2 3 4 5
REGISTRATION
ABC FREEZE
CVP-79A/69/69A
• Registration backup is normally ena-
bled, so the registration data is re-
tained in memory even when the
power is turned off. If registration
backup is turned off via the “Backup”
function described on page 107, all
registration data will be initialized to
the factory-preset settings when the
power is turned off.
• Factory-preset data is provided for all
registration banks and memory loca-
tions.
• Complete sets of registration data can
be saved to and loaded from disk as
described on page 99.
Registration Memory number